分享该职位

现代线束系统和独立的汽车内饰DRAEXLMAIER作为汽车创新行业的代表-我们专注于制造提高您驾驶体验的产品。每天,全世界大约70.000名同事通力合作,为实现这一目标贡献他们的知识,技能和对汽车行业的热情。每个独特个体都秉承着承担责任,发挥创造力和协作共赢的精神贡献自己的想法和创意。独特的个体就如你!

检测服务倒班主管

地点: 

Xiaoshi, CN, 117100

Job Req ID:  4826
职位编码:  50543045

Objective of Job(职位定位)

  • Cooperate in ensuring the availability of production-supporting equipment/systems, with functional leadership
  • 支持确保生产设备和系统的可用性,职能领导

Principle Activities (工作职责)

  • Functional leadership of employees.
  • 员工的职能领导
  • Coordinate employees (e.g. staff deployment planning etc.) and machine use.
  • 协调员工(如员工部署计划等)和机器的使用。
  • Change arrangements with respect to work sequences and working material in the event of faults and bottlenecks
  • 在发生故障和障碍时,根据工作顺序和工作材料更改安排。
  • Ensuring the necessary equipment for service technicians in the shift.
  • 确保当班服务技术人员的必要设备。
  • Support and represent the service technicians in the shift.
  • 当班支持和代替服务技术人员工作。
  • Ensuring the implementation and documentation of very difficult maintenance, repair and overhaul work on very complex equipment / systems as specified.
  • 确保根据规定,对非常复杂的设备/系统进行难度较大的维护,修理和彻底检修工作,并进行记录。
  • Assemble, start-up and relocate highly complex equipment / systems in the production plant in concert with customer requirements and specifications (e.g., equipment engineering specifications, etc.) while taking account of deadlines and quality.
  • 在考虑到期限和质量的同时,根据客户需求和规格要求(例如,设备工程设计说明书)组装,启动和重新安置复杂设备/系统在生产工厂。
  • Mounting, installing / removing and adjusting very complex assemblies / components in equipment
  • 装配,安装/迁移和调整设备上的复杂装配件/组件。
  • Implementation and documentation of changes or corrections to machine controls and machining programs as well as parameterization with preparation of the respective data sheets as specified.
  • 根据规定,更改或修正机器的控制装置和加工程序,并对各自数据表格的编制进行参数化处理,同时对这些工作内容进行记录。
  • Execution and documentation of checks for correct operation (e.g. mechanical, electrical, etc.) and test runs for equipment / systems.
  • 检查和记录设备/系统的正确操作(例如,机械,电气等)和测试运行情况。
  • Analysis of very complex problems / faults on very complex equipment / systems, if necessary using diagnostic systems
  • 协同分析复杂设备/系统的复杂问题或故障,在需要的情况下使用诊断系统。
  • Eliminate / have eliminated malfunctions (for example process failures, etc.) on machinery and equipment (e.g. tool breakage, etc.)
  • 消除/排除机械和设备(例如,工具损坏等)上的故障(例如,过程失败)。
  • Observance and compliance with all relevant processes and work instructions in the area of responsibility.
  • 遵守并服从所属区域职责范围内的所有相关的流程和工作指南。消除/排除机械和设备(例如,工具损坏等)上的故障(例如,过程失败)。
  • Collaborate to information flows within the involved departments and to supervisors.
  • 与相关部门的信息流和主管进行协作。
  • Identification and elimination (as specified) of vulnerabilities and development of proposals for improvement measures for equipment / systems.
  • 鉴定好排除(按照规定)漏洞,并制定关于设备系统改进措施的提案。
  • Collaborate to the implementation of all relevant audit requirements as well as internal and external quality standards and implementation of countermeasures in case of deviations and improvement potentials.
  • 配合执行所有相关审核要求和内外部质量标准,以及在出现偏差时采取应对措施,并提高潜能。
  • Establish spare part and wear part requirements, dispose parts purchases.
  • 建立备件和易损耗件的需求,处理零件采购。
  • Developing and proposing measures to improve the cost effectiveness of maintenance and servicing processes as well as maintenance standards.
  • 制定和建议措施,以提高维修和服务程序以及维修标准的成本效益。
  • Ensuring compliance with all relevant statutory safety regulations (in particular the Occupational Health and Safety Act as well as environmental protection) and the central DRX specifications
  • 确保遵守所有相关法定安全法规(尤其是职业健康安全以及环境保护)和德科斯米尔集团标准。

Job Requirements (任职要求)

  • Advanced vocational/technical training usually acquired through a degree in a technical or vocational discipline plus a few years of experience knowledge of methods, techniques and processes; mastery level of skilled trade)
  • 高级职业/技术培训通常通过技术或职业学科的学位以及方法,技术和过程的几年经验知识获得; 掌握熟练贸易水平)
  • Process oriented thinking Process
  • 过程导向思维
  • Willingness to learn
  • 主观学习能动性
  • Analytical skills
  • 分析技能
  • Solving problems
  • 解决问题
  • Innovation
  • 创新能力
  • Personal initiative
  • 个人主动性
  • Drive for results
  • 注重实效
  • Flexibility
  • 软技能
  • Communication
  • 沟通能力
  • Teamwork
  • 团队合作
  • Conflict management
  • 冲突管理
  • Customer orientation
  • 客户导向

 

 

公司: DEC Dräxlmaier (Benxi) Automotive Electrics Co. Ltd., 组织代码: EA57-XIA